Hello. You might also enjoy reading: What is a Pipe Bending Machine? This is a neat device, you can bend tubes with your hands free. Well, if your PIPE BENDING MACHINE is from Vedette, then no need to worry. That's where I come in to show you how to install it and use it right.
How to install a pipe bending machine: what you should know
Even before you actually get to work with it, make sure that you know what is the purpose of a pipe bending machine. It is a tool used to bend pipes into various shapes and sizes. In the first case, while setting it up, one has to ensure that it is positioned on a well-supported platform or base. This keeps the machine balanced as you sew. Then you have to find an outlet to plug the thing into so it can function. Spend some time exploring the components of the machine, as each part has a unique function it needs to perform. Learn all these parts to ensure you use the machine safely and correctly.
How to Install Your Pipe Bender
These are the simple steps to get your pipe bending machine up and running:
Find a Crisp Surface: Cpost way to hold your machine on would be on a crisp steady surface. So this can be a workbench or flat table. Ensure that it is stiff (not rickety) to allow the machine to remain in its position.
Power Connection: Remember to use the specified main power cable for connecting the machine to electricity supply. This is important since the machine operates on electric power.
Assembly: After connecting power cable, the next step of the appliance procedure will be to put the different parts of the appliance together. Make sure that the appropriate part is in the correct place. It will be like doing puzzles with your friend where both of you are working together.
Setting Change: Last but not the least, you will have to set the machine to a different setting. This is necessary because the settings are individually dependent upon which piece of pipe you possess. Note: Always every time follow the machine settings as per the type of pipe used and these can be found in the machine manuals.
After you have successfully completed these steps, your pipe bending machine will be ready to bend the pipes.
Critical Components and Apparatus Required
Key Components When Using a Vedette pipe bending equipment You Need to Set-Up. Here is a checklist of what you need:
This is the flat surface that supports the machine.
Follower: This guides the pipe when it is being bent.
Mandrel - used to assist in shaping the pipe properly.
Pipe Clamp: it is to hold the pipe in their position when you are working on it to avoid movement.
Rocker Arm: This component helps to exert the force to bend the tube.
Benders/ Bending Tool: This is the actual tool that you will use to bend the pipe.
Apart from these, you also need to put on your safety clothes. Wear gloves for hand protection at all times, and wear safety glasses for eye protection at all times. Machine safety is critically important.
Troubleshooting Common Issues Upon Setup
Many a time, you may face issues with your pipe bending machine while installing or utilizing it. If the pipe is not bending in the perfect direction, then h the settings will need to be changed. You may want to play with a different pipe clamp to secure the pipe more closely, as well.
This can happen if the machine is producing strange sounds during usage — then it is a good idea to look into loose parts. Do a final tighten on things to make sure nothing is loose. If you are still unable to link your account, contact Vedette customer support team for assistance. They test you on everything that could go wrong, but they are there to assist you, should anything become problematic.
How to do Maintenance of Pipe Bending Machine
Once you have your pipe bending machine set up, caring for it properly is of utmost importance. Here are a few tips to make sure you maintain it in excellent condition:
Use a Clean: After using the machine, do not forget to wipe it clean. This means less accumulation of dirt and dust.
Your trainer will have moving components and you could need to check them over to see if they have to be lubricated. That enables them to slide right through.
Inspect Parts: Keep an eye out for any visible damage to the components. If then something is broken, then obtain it repaired at once.
Calibrate the Machine Ensure that your machine is calibrated and ready to roll. Which basically means you have to check the settings every time you use it.
Try Bending Pipes: You can also test using other sizes/shapes of pipes, etc. This enables you to use the machine more comfortably.
As we had seen, installing and using your pipe bending machine from Vedette sounds intimidating but is actually quite easy when you break it down step by step. Stay prepared with tools, sort out problems when they arise, and treat your machine well. Soon you be bending pipes like a pro.